Introduction
Deploy the WR-402 with a clear process for mounting, antenna placement and secure onboarding.
Prerequisites
- Approved cabinet position
- Antenna kit and SIM details
- Firewall and LAN plan
Steps
- Mount the device
Install the WR-402 on DIN rail and keep service clearance around all ports.
- Place the antennas
Keep antennas away from noisy power equipment and document their final orientation.
- Commission network access
Configure WAN, LAN and VPN access, then validate outbound connectivity.
Note: Capture signal strength and baseline latency during commissioning.
Image: Cabinet layout with WR-402 antenna placement.
Expected Outcome
The WR-402 is ready for secure remote service.